1
answer
1
answer
Connection from PM866 to CI501 RIO through customer network
PLC Automation > AC500, 800xA > AC 800M > Processor modules > PM861, PM864, PM866, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET)
0
answers
CI504-PNIO COM port with "Telegram Ending=Character Timeout" accessed by PNIO_COM_REC abnormal behavior
800xA > AC 800M > CI modules (other), 800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500 > CI modules, PLC Automation > AC500, PLC Automation > Engineering > Automation Builder
0
answers
ABB ac500 to acs355 drives failure over profinet
800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500
4
answers
Is it possible to deactivate a PROFINET slave device, like CI502
800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500
1
answer
Question about CI502 module communications capabilities.
800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500
1
answer
Addressing CI50X module
DCS in general > Networking > Protocol > Ethernet, DCS in general > Software > Configuration, 800xA > Fieldbus > PROFINET, 800xA > System > Administration & configuration > Configuration, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500
0
answers
AC500 (Automation Builder) Profinet Commincation error with Balluf BTL7-V50T SensorSa
DCS in general > Communication, 800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500
2
answers
High availability for non-safety and redundant PROFINET safety modules
800xA > Fieldbus > PROFINET, PLC Automation > AC500 > CI modules > CI501, CI502, CI504 (PROFINET), PLC Automation > AC500, Safety Systems