Is the STOP TIME of the controller allways > 0ms in a warm restart ?
System versin 5.0.
I have a controller (will call C1, it is an AC800M PM866) running with:
- Total cyclic load: 83%
- Cyclic load: 49%
- Used memory: 43%
- Last Stop time : 1490ms
The problem is when I perform a warm download, the total cyclic load goes to 100% for almost 5 minutes and the stop time remais between 1.5 s.
This is not good: I have another controller (C2) that reads MMS variables from this controller. When I perform a downlaod, C1 stops by 1.5s and the variable that C2 is reading by MMS goes to 0 during the stop time, interlocking the process in the C2.
When I do changes in the application (not in the hardware) and download it:
- What is the normal behavior of the System Diagnosics properties (total cyclic load, cyclic load, stop time)?
- Total system Load always reaches the 100%? (if yes, how much seconds in generally?)
- Stop Time always is grathen then 0 for any changed application downlaod?
For this reason I intend to split the application in 3, but before this, I woul like to know what expect for the result of the split.
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.