AC500 WITH CHMI
hai ABB wishers,
In site we are facing the following issues. PC:windows 7 professional(64 bit) control builder:2.1 plc:pm573 SCADA:CHMI5.1.0/2 1)when i am restarting or recycling the power to the pc and also plc the communication between plc (opc server)and opc client(Chmi 5.1) was not happening automatically.but when i am trying to intiate with matricon as a client at that time only opc gateway server(icon) came to visible with that it was communicating.after a this establishment only chmi communication was hapening. At the time of establishment with matricon i am getting the pop windows as follows. "gateway server 1210 and 1211 was occupied by someone".this window came at the of opening commmunication parameters in codesys. at normal condition after restarting it is taking time up to 5 to 10 minutes.but this also not happening consistently.some times communication was not happening permenantly. i tried with gateway as startup with chmi but i am getting "gateway server 1210 and 1211 was occupied by someone" popup window. 2)After restarting historical trend was not updating even though basic historic was in running condition.it was happening again after disable/enable the log configuration. Anyone can give solution to this!... Regards S.DINESH
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.