Some of pid output value drops to zero In Ext2 SetPoint Mode
we observed sometimes the output of the PID value becomes zero after enabling the external set point mode 2
Type of Block used: ControllerPID(PCDL Library)
Set Point used Parameter in PID:SP2_R
PCDL version:PCDL 5.8-0
800xA verstion: 5.1 RevD FP4
Observation:- 1.There is no change in set point value coming from APC
2. After couple of hours ruing loops in APC mode the problem will appears in some of the loops(Not in All Loops)
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.