800xA 5.0 IM logs
My customer has a 800xA 5.0 system with an IM server and Advant 450 Controllers. Data is used for enviromental reports.
I have 2 problems in this system:
1. most log configurations logs from TTD-logs in the controller. Sometimes a log stops loggin values. The reason seems to be that the TTD logs stops providing data, since the problem can be cured by restarting the controller. However on a power plant this is not possible most of the time, so I'm looking for a way to make the TTD logs run again. I have tried to kill and restart the DCTA100 task in the controller, but that didn't help. I have been told that DCTA200 and DCTA500 are restarted automatically when you restart DCTA100, so I have not tried to restart those manually.
2. some logs suddenly start to log values on the wrong time - e.g. a 1 hour log logs values at xx:22:00 in stead off xx:00:00. I have tried to stop/start the log. How do I make these log at the correct time again.
Thanks in advance.
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.