Answer question
QCS800xA 6.0 SP4 Tool Error!!
Hello,
I install QCS800xA 6.0 SP4 but some of tools can not open correctly.
MD Open Interface Project Creation and Actuator Open Interface Project Creation can not open.
It describes Run-time error '9' Subscript out of range.
My circumstance is as below
All Failed :
Test 1 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.1
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Test 2 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.0.3.2
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Test 3 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.0.3
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Also, I have one more question.
When I deploy PPLib800xA 6.1.4, it is not softly deployed.
Deploy failed, so, had to manually resolved and successfully.
Is anybody have got this same symptoms??

I install QCS800xA 6.0 SP4 but some of tools can not open correctly.
MD Open Interface Project Creation and Actuator Open Interface Project Creation can not open.
It describes Run-time error '9' Subscript out of range.
My circumstance is as below
All Failed :
Test 1 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.1
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Test 2 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.0.3.2
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Test 3 : Windwos Server 2012 R2 (ASCS combined server and Install QCS)
800xA 6.0.3
QCS800xA 6.0 SP4
PPLib800xA 6.1.4
Also, I have one more question.
When I deploy PPLib800xA 6.1.4, it is not softly deployed.
Deploy failed, so, had to manually resolved and successfully.
Is anybody have got this same symptoms??
