Answer question
OPCDA Service Group Adapter identity
Hi.
I did a seconde pair of Connecivity Servers in the same Controller Network to have less Load on each Server.
Example:
Connectivity Server Pair 1 --> Controller 1-15
Connectivity Server Pair 2 --> Controller 16-30
It is easy to set up the Controllers in the OPC Server.
I also configured the OpcDA_Connector Service. I made a seconde Service Group with the Service Provider of both new Connectivity Server.
But the Service State does not go on "Service" because I have to configure the Adapter identity in the Special Configuration.
Service Group 1 has Adapter identity: ABB.AdvDsOPCServerAdapter.1
Service Group 2 has Adapter identity: {0000000-0000-0000-0000-00000000000} --> Nothing.
How can i get the correct Adapter identity for the second Connectivity Server Pair
THX
I did a seconde pair of Connecivity Servers in the same Controller Network to have less Load on each Server.
Example:
Connectivity Server Pair 1 --> Controller 1-15
Connectivity Server Pair 2 --> Controller 16-30
It is easy to set up the Controllers in the OPC Server.
I also configured the OpcDA_Connector Service. I made a seconde Service Group with the Service Provider of both new Connectivity Server.
But the Service State does not go on "Service" because I have to configure the Adapter identity in the Special Configuration.
Service Group 1 has Adapter identity: ABB.AdvDsOPCServerAdapter.1
Service Group 2 has Adapter identity: {0000000-0000-0000-0000-00000000000} --> Nothing.
How can i get the correct Adapter identity for the second Connectivity Server Pair
THX