PM554 integration with ARG600 with customer's fixed IP SIM card.
My customer having a requirement of pull out data from the oil well using Wireless technology(using SIM card) and display the same in remote control station.
Have designed a architecture with PM554-ET controller & ARG600 wireless gateway with single sim device and made a setup for well side.
We suceeded doing modbus program using Automation builer & Codesys sw and tried to read the data through Modpoll simulator software.
when come to integration part with ARG600. we cannot able to succeed. With the given fixed IP simcard(192.168.224.102), we tried to ping the ip address from the customer's wired LAN network and the same was successful, but using the same IP address tried to open the modbus 502 port with modpoll sw then the connection is not getting through.
we tried also port forwarding(D-NAT) in ARG600 considering SIM card as source and controller as destination but could not works.
Note : controller ETH port, ARG600 LAN port and test laptop are connected with ethernet basic switch. Pinging is happening between all this devices.
Fixed sim ip details
IP - 192.168.224.102 & subnet : 255.255.255.255
ARG600 LAN port IP(through this port controller is connected to ARG) - 126.96.36.199 & subnet : 255.255.255.0
PM554-ETH IP - 192.168.220.11 & subnet : 255.255.255.0
Anyone please help in this regards.
Herewith attached the photograph of the setup and also the architecture of the same.
Thanks in Advance... :-)
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.