800xa for mod300 - S800 I/O DO820 INITIAL COMMAND
I have an AC460 with some S800 I/O module (model DO820)
to be started at controller boot with a particular initial command.
I configured a device loop for a motor start/stop control,
with 1_in_2_m_out device type.
The stop contact need to be normally closed and we could
only do it by software by using the "inverted output" feature, for now,
I mean not by using an additional relay contact.
The problem is that when we load the AC460 CPU the initial command
is executed but the S800 I/O module does not set the output
that need to be closed as requested.
The only way to do so is by making a "restart" of
the DO820 I/O module from the MOD Engineering Display.
After this action the output goes "phisically" in the right state
as requested by the INITIAL COMMAND.
Additionally I get a S800 channel error at boot time
but only during startup not during the restart phase
of the DO820 module
I wonder if anybody has already experimented this kind
Advabuild version is 3.7 P1.
Thanks everybody for any help.
Insert the URL that your highlighted text will link to.
Copy the video's "embed" tag into Embedded Video below.