Multi system Integration
I need to do Multi system integration between 2 servers. Can anyone please help me out with the process. Steps that what needs to be followed.
Refer the attached document, section 2 and 3 explains the installation and configuration of MSI and Section 4 explains the operation point of view. Hope it helps
Basicaly 800xA Multisystem Integration makes it possible to supervise and operate several 800xA systems from one central operating room.
Remote Access Server
The 800xA system to be supervised is called the Provider system, since it provides the supervising system with data. The supervisor system is called the Subscriber, since it subscribes to values from the provider. All engineering and configuration of the provider system is done locally in the provider system.
Remote Access Client
The Remote Access Client service communicates with the Remote Access Server, but resides on the subscriber system. There is always a one-to-one relation between one Remote Access Client and one Remote Access Server, i.e. it only communicates with one Remote Access Server. The Remote Access Client service