Workplace freezing problem in 800xA 5.1 Revision E FP4
In an already running configuration on the server , screen freezes just as we lauch the operator workplace. the screens freeze even when tried to open any screen from engineering workplace.
there is no preview as well.the OPC server is connected , all services are running fine.
We tried restarting services,restarting controller and server, but it didn't work out.
When we tried pinging the controller we are getting 2-3 delayed responses after every 10 packets.
Any help is appreciated
maybe your startup display is using too much memory ?
In Task Manager, the afwworkplaceapplication.exe should not exceed 1200 MB memory.
Change your startup display to an empty display and verify if it works.
Is it possible to start the workplace in an aspect server ?