800xA 6.0.2 RU2 Alarm Logger on line printer
We can print alarm on Alarm printer as a page, it print as a page of 60alarm. But while configuring line by line print, the service is not issuing any print command. It's not coming to the printer or print in print stack.
Any suggestions or am I missing any setting.
Follow the steps:
1.configure the generic printer as standard TCP/port on the machine where u planned to run the logger as service provider.
2.Open the plant explorer from the logger machine(on the machine its mapped in SCC) and select the common logger for alarm and event from service group level
3.Select the printer type & name (generic text only) & enable the service provider
refer 3BDS011222-600_A_en_System_800xA_6.0_Configuration on page-152 onwords