Smart client and view client.
Sir.
I required two things.
1st One big monitor at my local control room to display some perticular 2-3 fix screen.
2nd Some higher authority wants to show that perticular screen in their offices using web.
Now Is this two things are same?
And how can I do it?
I have samrt client licence. But I don't know how to configure it.
So please let me know how can I fulfill this two differnt things.
If there is any tutorial for this please attech the link.
Voted best answer
Hi Nirav
Correct me if my understanding is wrong !
You want to display few PG2 graphic display in a bigger screen monitor like 42 inch or above screen size and you want to view them in Read Only Mode.
And your second requirement is, your higher authority wants to see this in their office.
If it is correct then Yes, this can be done with Smart Client.
If you want to operate the PG2 Graphic display on the bigger screen monitor then you would be needed an Extended Operator workplace (EOW).
If you have Smart Client license then you should be having Smart Client User manual. Refer manual to Configuring Smart Client.
You would have to setup SC Server, SC DataProvider and firewall.
Regards.
Answers
Hi Nirav,
There are couple of questions that is not clear from your mail. What is the version of 800xA system that you are using? Are the displays PG2 displays? Currently how have you installed the Smart Client server? Is the Data provider for Smart Client installed on the 800xA node already?
Smart Client can definitely be used to display process graphics and KPIs for management in their offices. But not all 800xA graphics are supported.
So my suggestion is, please get a complete picture of the capabilities of Smart Client by speaking to a local ABB technical support.
Regards,
Naveen
Add new comment