slow operation in 5.0 sp2 in 800xa abb
you should verify your Network.
Try to copy a big file between some nodes if you have several nodes like AS, CS, Client.
Copy to and from, eg AS -> CS, CS -> AS.
Calculate the speed MBit/s from the size of the file and how many seconds it takes.
Problably you find the reason, if it is a network problem.
After having verified that the network links between servers and clients can read + write at least 5 Megabytes/second, continue with the following:
1) Verify DNS configuration (refer to the System Network Design & Config User's Guide).
There are checks to be made in DC as well as in 800xA clients and servers.
2) Check that Config Wizard -> System Administration -> RNRP Network Filter is:
b) configured correctly*
*) The address(es) shall reflect the current RNRP network address in use, eg 172.16.4.0.
If problem continues, contact your regional ABB support center.