5.1 Client System connection problem
I am facing problem while connecting client system to server system(5.1FP4RevD)
It showing -Could not connect to the system "Abort" (popup).same error screenshot is attached below.
Can anyone know what may be the problem.
Voted best answer
as I understand you don't have problem when Add Client, but later on trying to start a Workplace.
A lot of cases are solved by tuning the network.
I don't know which type of switch you are using, you can use another switch between the computers to find out if it is the problem.
Otherwise I recommend a System Health Check (if you have attended that ABB Univeristy course you know what I'm talking about), which probably helps you find the problem.
Disconnect/remove the client from the 800xa system. And restart the machine. Once after restarting try to add the client server to the 800xa system from the client machine.
This issue comes when 800xa system is down and you are trying to connect to the system from client machines.