800xa graphics shows cross mark for one application
Please check the below mentioned things in your system
1. Check the IP is configured on respective Connectivity Server
2. Check for the affinity settings assigned to the particular Connectivity Server
3. Check the application is connected to the controller which is created newly in CBM
Thanks and Regards
Hope the following method used for shifting app from one controller to another.
1.Set Ip to new controller and Disconnect the app from one controller and connect the app to other controller (ensure respective lib linked).
2.Relink the IO respective to new app shifted (paramters/min/max/unit and other settings)
3.Warm Download both controllers (New controller will take as cold/fresh download).
4.Add controllers identity in connectivity servers for both OPCDA & AE.
5.Check RNRP to ensure both controllers visible in all CS (OR) in all OS if routing is used.
6.subsrcibe for data for the new controller.
7.Check for CS affinity for the clients and ensure by opening system status veiwer for OPC DA and AE
Note: If fbd/Control modules are moved between apps by drag drop via CS then redeploy of graphics required