Redundant Controller Network
I have redundancy network problem with PM866 controller.
Through IP Config tool, From Advanced option I have set IP of Primary.
Then from Control builder did the following settings
1) First Ethernet Channel IP(172.16.4.152) & subnet mask.
2) In Second Ethernet channel IP(172.17.4.152) & subnetmask
3) In Second Ethernet channel, i have enabled a Parameter "Enable ethernet Channel" to True.
I'm able to ping both the IPs. Downloaded the application. I can see both the IPs in Controller log as well.
but when i remove the network which is ocnfigured as system identity in online, I'm not able to see the live data. And not able to ping the IP which is set as system identity, but can able to ping the other one.
I'm using normal switch for both the networks. Using compact control builder 5.1. Firewall is turned off. System: Windows 7
Please let me know how to resolve this. Is there any place to give both the network IPs to the controller??