how I find the SP4 HF1 for used digitool V6.1 for NEW DCP10 CPU ? first I must be indicate Hardware 50.XX sN ?
pls note that :
With hardware revisions index 40.14 and 50.03 and higher the Freelance CPU modules DCP 02 and
DCP 10 were changed incompatible. Cause is a necessary redesign. When using these hardware, it is
mandatory to use specific software versions. Application compatibility is provided.
Without an update the CPU EPROM download is not possible and results into the following error
”EPROM download failed. Connection to station could not be established.”
Please note that with former software versions than 5.1 the CPU modules with HW revision index
40.14, 50.03 and higher are not supported any longer!
Gateway CPU’s based on DCP02 and index 50.03 are supported with version 6.1 SP4 only.
When available with version 6.2 SP1 too. For all other versions DCP10 modules must be used