Aspect Server Rebuild
I had a failure on Primary Aspect Server.
It started with afwconwig appcrash and got worse.
It is my first time installing ABB.
I need to rebuild the Apect Server but need information and steps to get back
running and Aspect server back in the system.
ABB lacks documentation and user guides.
The guides are not perfect, but the scenario should be covered by the Maintenance Users Guide, Single Node Replacement procedure.
Typically an aspect server does not fall into pieces by itself; from your description one might suspect a bad hard disk, installation of non-compatible software or 3rd party software, eg .NET 4.0.
Do you have any drive image backups that you can restore?
Do you have any system planner files left from the original installation that would guide you through a software reload?
Personally speaking, in lack of the above you could clone the other aspect server and use it to bring the lost one back (you need to change IP, hostname and wipe the old system off it before using "Connect node" to bring it back into the system). In fact; ANY other server can "easily" be transformed into an aspect server with the help of a drive imaging tool, the 800xA DVD kit and some minor efforts.
Since it seems to be your first encounter with 800xA, I sincerely recommend involving the regional ABB support center.