800XA MB300 connection
We have an Interface with 800XA 4.1 to Advant MP200 ( Master Piece 200) over Master bus 300 , we are getting the alarms and events . but the alarms are appearing in 800XA system in the acknowledged form , is there any way to make them appear in the Unacknowledged form .
Voted best answer
Please read about "Event Treat Elements" in Appendix A in the 800xA for Advant Master Configuration User's Guide, 3BSE030340-510 B.
From your description, it sounds like you are making use of custom event treat settings in the controller and that your RTA board's Event Treat database is missing these.
Try by setting LIM_x_TR to "4" (the standard event treat record number for alarm for analog signals) for an MB300 AI Calulated (AIC) object and see if a proper alarm is emitted then.
Once the event treat elements have been setup on all RTA board(s), remember to perform a RTA Backup so that they will be retained at next restart, reboot, etc.