How to make overlap Graphic displays open in 1/4 size
Is there any way to make the graphic display open in 1/4 th size , when open as overlap.
Customer want to open the 4 popup display at same time.
Is there any option in 800xa 5.1 Rev C
Haven't tested; but what if putting the four displays in a fifth display using view wrapper?
VB6 performance drop sharply when runtime scaling is forced as it would in theory above.
PG2 performance is not affected by scaling, but wrapping four displays into a fifth would probably cause display callup time to roughly the sum of all individual displays plus some extra for the fifth.
If # of displays are limited, copy / pasting their content to new displays of a new custom aspect category with custom view class controlling the XY size of display could be an alternative. Maintenance increases since two sets of displays need to be maintained.
Group Display exist too, but won't scale content (just show scrollbars if content exceed cell size)
This was feature in PPB System, Where all new display will open as 1/4 of the size of the normal displays. So then will call 4 display and maximize when required.
We did not find a solution , But used a Quad display and in tools we have added a Zoom button. Which will allow them to maximize a perticular diplay. If Zoom button is pressed again it goes back to normal display.