i want to adjust Time Synchronization between AC800M and connectivity server
i have large system and i want to adjust the time Synchronization between AC800M with the connectivity server or with the Aspect server
Voted best answer
There are diferent recommended Time Synch Schemes mentioned in the manual and refer 3BSE034463-510_A_en_System_800xA_5.1_Network_Configuration.pdf manual on how to do the Time Synchronization.
To achieve the best time accuracy in the total system, it is recommended to
distribute the time “upwards” in the system, from the Control Network to the Client
Server Network. Typically a controller will act as time master for the Control
Network and the rest of the system will be synchronized from this source.
This way of synchronizing is better than the other direction, because the protocols
on the Control Network support a higher accuracy and the implementations of the
real-time clocks in the Controllers are better than the protocols used between PCs
and the Windows time.
Every system is unique - there is no golden time sync setup that "fits all".
I agree with previous answer by Arihant, but I need more info about your system setup before giving any answer.
Please read the answer on this thread first:
If you can dig up some more details I may be able to give you some suggestions.