RNRP - TCP/IP Forwarding Issue
I've got following issue on customers site. (800xA 5.1 FP1)
I've installed Eng. stations which are working on Plant Network only.
to be able to use CB i've enabled TCP/IP Forwarding parameter on Connectivity Servers and restarted them.
Thing is that Eng. station still can't go on-line with CB project, no comunication with controller.
I've got suspicion :
Plant Network is using adressing 10.16.24.x adressing. Rnrp is configured with 'Explicity'
please see attached print screens.
Control Network Runs on 172.16.10.x adressing.
Could this 'Explicity' Settings couse malfunctioning of TCP/IP Forwarding?
Please Gents/Ladies, Adivse.
Voted best answer
I had a similar issue during commissiong plant. If is the first download to controllers, the download must be from server connected directly to control network (connectivity servers, engineering stations with dedicated control network netcard). After that, the controllers will appear in RNRP and the download from other station thought connectivity servers (using forwarding) is possible.
I hope this help you.