Major problem with ABB Motiflex remote controlled with PM590
I'm have a GearIn application with 2 Motiflex e180, remote controlled using a AC500 PM590 CPU with Ethercat.
My Master doing a linear movement back and forth, and the Slave is syncronized with MC_GearIn and MC_MoveContinusAbsolute.
After a couple of hours of operation the application pauses for some reason.
The Master(The linear movement ) looks fine, no errors in the MC-blocks or in the drive itself. Drive is in "P" mode(Position)
The Slave has an error on the MC_Power block, ErrorID:1. This drive goes changes from mode "P" to just "-".