I was using TimePulses (BasicLib) block for resetting a totaliser. Since the clock has gone forward, the Totaliser is now resetting at 1:00Am instead of 12:00Am.
I believe this is happening beacuse the TimePulses block is using system clock for getting the time.
Has anyone faced this issue before or any ideas for fixing the issue.
Sounds like your TimeZone settings in the controller are messed up.
By default, every application should come with a "Program3" that contains a "SetTimeZoneInfo" function block. Hopefully you still have this in your application. If not, you should rebuild the code that normally appears in "Program3" and add it back into your application. Run one copy on each controller. (Make a new blank project and copy the code from it)
Go online and check the Interaction Window for the SetTimeZone function block. The correct timezone settings * should * come your clock master, but may not be.
There is of course the side issue of whether you should actually fix this. When savings time begins and ends, your daily totals will be wrong by 1 hour of production twice per year.