REAL value to IEEE754 32-bit floating point
I have the IEEE-754 to Real app running on our system however I am now in a need to write to the device using IEEE-754.
Does anybody have a solution for this?
Thanks in advance.
also attached here with similar exported .fbd file, import inside fbd program. Incase you are not able to read correct value at device, you may need to use reverse IEE754 at device end. because with this logic it works like this
Block-1 : IN1 = 16968 (4248H) goes to Block-3 : O01 = 16968 ( 4248H)
Block-1 : IN2 = 0 (0000H) goes to Block-3 : O00 = 0 ( 0000H)
In your case connect real value directly at input of block-2
Hope that helps