HART by Compact Control Builder
Hi,
I know that Compact Control Builder does not support HART because this integrated development environment don't have anything that could give the information sended by the devices.
But, AC800M can pass this information for example to 800xA (by the software extension "ABB Device Management PROFIBUS & HART")
I would like to know if exist another software that could get the HART information by means of the controller. Because I don't have another connection to the device.
Thanks in advance.
I know that Compact Control Builder does not support HART because this integrated development environment don't have anything that could give the information sended by the devices.
But, AC800M can pass this information for example to 800xA (by the software extension "ABB Device Management PROFIBUS & HART")
I would like to know if exist another software that could get the HART information by means of the controller. Because I don't have another connection to the device.
Thanks in advance.
Asked 4 years ago
Voted best answer
1
The AC800M is just a "pass-thru" of HART information on a Profibus network. The AC800M controller is not really involved at all.
You should be able to use pretty much any third party "HART over Profibus" interface.
Answers
0
Software that uses the AC800M as means of connection no. But ABB has the Asset Vision Professional which is a standalone fieldbus configurator. But you must have the interface and infraestructure in order to connect to the device.
Answered 8 years ago
0
I think it is not possible, just using ABB controller, is there software that can serve to have all the data, but you need one extra hardware like serial modem or USB modem.
Add new comment