How AC800M Modbus TCP comm with Siemens S7 .
How we configure CI867 in CBM, what are the settings we have to do.
what configuration in logic to do in MBTCPConnect Block .ex: channel value?,Partner Value.
if possible explain with IP address.
The Connect Block should point to the position of the CI867 with the "Channel Value".
The "Partner Value" points to the Channel on the CI867, Position Of the Slave Object and if Gateway is used the position of the gateway.
See attached Example.
If the MbTCP Slave is using an ID other than 255, i.e not following the MbTCP standard, a Gateway must be used and then a serial slave Object points out the ID with its position.