Redundant ModbusTCP Manual Switchover
In my project I'm using Redundant ModbusTCP communication via CI867 card.
According to user manual, primary redundant card switchover only these cases, list below:
*Cable break to the closest switch
Do I have any chance to switchover primary card via software or a button on graphic page?
Thanks for your advice.
There is option if you added the both CI867 in redundent configration in CBM.
1. Go Online
2. Right Clcik on the CI867
3. Go to Redundency
4. There is 2 option Switch Primary and Reset First press Swtich Prmiary and see if the lights are changing.
5. after switiching to secondary you can press reset button and you will back to prmiary one
Source: CI867 Redundency Check