MCM800 Vibration Modbus RTU
Does anyone have any information on the Modbus capabilities of the MCM800 Vibration product? I see a dipswitch to go from Modbus/Profibus...but I can't find any documentation that describes the Modbus registers.
It looks like it will do what I need...but I'd also like to retrieve values (RPM, etc.) via Modbus RTU.
I looked through my files, which includes premium content, but I could not put my hands on any Modbus specifics. The documentation is limited to the dipswitch information that you mentioned. The best source of information that I found is document 2VAA000341. There is a reference on page 23 to a "Profibus Users Guide" but I could not put my hands on that. There was no similar comment on Modbus. We have these modules in use but use the Profibus form of communication.
On page 34 of 2VAA000341 it states that "The MCM800 system is part of ABB’s Symphony Plus technology platform". I suspect that most people monitoring this forum are 800xA based, and we will need someone from the Symphony side to help provided the needed information.