DCP 10 Cpu modul
We have a Dcp 10 cpu in our plant we have a serious problem
About 2 week ago our cpu modul was failed and does not communicate with the pc and when we get diagnostic of the cpu we see below error(Pic 1)
0x26000001 SRam Word access
So we changed the cpu .the new cpu work 2 hours and the then does not communicate and we download program again. we do this job several time.
At the last time when we loaded the program and system was working the cpu was failed and when we get the diagnostic we see error that was the first cpu problem
Now our 2 cpu have same problem
Looking to criticality of your case and plant situation I recommend to get in contact with your local service provider there, find reference for your region,
And do not try to reset controller and reload program again and again, may error count buffer get exhausted and CPU get lock or will go into fatal error.
From hyper terminal window, seems you are connected with diagnostic cable, Save the log and attach it will help in diagnosis.
Hope this helps