Compact Control builder AC800M 5.1.0 library warning
I get warning when i open a project backup in Compact Control Builder AC800M 5.1.0.
It says "Two identical libraries has been found!. It is not recommended to use two libraries with the same name and identifier."
I have checked the library folder in C:\Program Files\ABB Industrial IT\Engineer IT\Compact Control Builder AC 800M 5.1\Libraries., but i did not find any identical libraries.Please help..
This is a known behaviour as there the old info about libraries are still in the memory and when open the other project it give this false warnings.
Very easy solution is you to install Control Builder on other PC (clear installation), then restore your backup there, preferably in folder:
C:\ABB Industrial IT Data\Engineer IT Data\Compact Control Builder AC 800M\Projects
and save the project. Then you can backup it again.
On the existing PC most probably you insert the library from the other locattion, than the standard one (project folder) and Control Builder remember this location even if you move manually the library.
Tip: in Backup folder you can find txt file with description of the path for each library.
You can change this manually and then to copy your libraries manually to this location.
Generally, it is heavy and complicated procedure with moving / copy / backup of application with Compact CB. You have to be always careful if all libraries are saved with your backup. In old CB it was more easy - just copy the project folder and that is all !