Panel 800 Prjoect download error
Hi, I am currently doing a commissioning on the Panel 800 Ver 6 PP877.
2 Weeks back when I power on the panel and download the project, it was displaying normally. But somehow the touch panel went back to its default setting screen.
When i try to download the project again it game me an error message as attached in the photo (Img_1724.jpg).
I tried to create an empty to download but it still failed. I also did a power cycle.
On a sidenote I did set the IP address in the Tags (controller) page and also the setting page. Also in total I have 3 of the same panels but different graphics. The other 2 is working fine except for this.
Can anyone advise on what is the error about and how do I go about restoring the panel?
You can try to enter in Panel Settings from the Welcome screen - it appears automatically after power on of the panel, if it is empty. If the panel contains some project, you should follow the manual instructions:
Perform the following steps to enter the service menu:
1. Apply power to the panel.
2. When the hourglass appears, press a finger on the screen and hold for approximately 20 seconds.
To access the Service menu with a keyboard operated panel, press and hold the Home key as soon as the hourglass appears at start-up. Keep pressing the key until the Service menu is opened (about 20 seconds).
After you enter in the Welcome screen, select Erase the panel and try to erase the panel. Then set the correct IP address again from this screen and download the project again from Panel Builder.
Read the Service Menu in 3BSE069489-602 for example