PU410 Network and Node number
How to verify or set the Network number 1 ,Network number 2 and node number
How to change the default configurations if you have more than one PU410 in network.
Do I need to modify the IP address of RJ45 port PC1 and PC2 to control network IP address? how I can change if needed ?
I am setting up PU410 first time. I don't have munch more ideas. Any suggestions welcome.
Note that 800xA version is 6.0
Voted best answer
1) Same as before. The RTA Board Configuration aspect on the RTA object
2a) Read the user's guide!
2b) Change box IP with PU410Management tool
2c) Verify PU410 is shown by RNRP monitor by its new number. If not, go to 2a)
2d) Update Windows Registry to new PU410 address
2e) Restart the 800xA RTA Management Service. Verify boot succeed on 1)
Avoid having PU410 on LAN with other stuff - its not supported (yet).
With >1 PU410 on same LAN stay off default IP to prevent "capture" by server having or becoming with default IP in registry.