ETH3 port of AC 900F for redundant control net settings
Hello Shadab Rauf,
To set up redundant control network simply configure another subnet and use IP addresses on the ports. For example lets say our primary network address for an AC 900F is 172.16.1.1 with mask 255.255.240.0 on ETH1, Redundancy Link on ETH2 and something like 172.17.1.1 with mask 255.255.240.0 on ETH3.
For Operator Station You simply use the same subnets, for example 172.16.1.22 and 172.17.1.22 (both in 255.255.240.0 mask).
Then You simply input the addresses into Network Configuration. That's all you need to do.
Hope this helps,