Question about maximum performance using CI867 as slave
I want to use several CI867 (MB TCP) as a slave. Does anybody know what the maximum amount messages is, when using one or more CI's as slave? In the 800xa Communication protocol manual this is not clear when using CI 867 as a slave.
It should be 80 TR/sec for a single CI. when using more CI the amount of TR/sec should decrease. Does anybody what the rules are for de amount of decrease?
The peak throughput for CI867 as slave is 20 transactions per second, when one
master is connected to CI867, which means 5020 bytes (20 * 251 bytes) per second you can send to master.
The peak throughput for CI867 as slave is 80 transactions per second if a maximum of 8 masters connected to CI867, with maximum of 20 transactions per second for each master connected, which means 20080 bytes (80 * 251 bytes) per second, you can send to master.
But ofcourse this is totally dependent on Master performance. And the above throughput is calculated considering Master requesting data for every 50ms. So please check, whether your master can poll the data for every 50ms or not.
Hence i want to know how many bytes of data you want to send it to Master (to just answer - Why several CI867 as slave is required in one AC800M?) - Thanks