Upgrading PMS Lib 5.0 to 5.6.2
As i mentioned in the prevoius post
we are upgrading 5.0 system to 6.0.1 system along with PMS lib upgradation.
In first step we are strating migration of VB graphics from 800xA 5.0 to 5.1 FP4,so could you please suggest which version of PMS lib has to use?
Finally our final system will be the 800xA 6.0.1 system(PG2 displays & PMS 5.6.2)
We in ABB Australia have just performed this very upgrade from 5.0SP2 to 6.02 and VB to pG2 graphics. The graphics migration was done through a step to 5.1 prior to moving to 6.0.2. The PMS library upgrade is very indepth and required a lot of reconfiguration steps for example MMS is not supported so you need to reconfigure system to use IAC.
If you need more information please contact me at firstname.lastname@example.org.