How can I upgrade firware of a panel TD 951F?
I have just started a new 901F controler with a TD 951F panel. The display complains that "Display firmware update required". How can I do that?
I don´t have any cabel (TK 890/891F) available, so I can´t configure the CPU trough the terminal program.
Incase if it's very fresh controller, where there is no difault IP address. not possible to upgrade firmware via configure tool need special cable and use hyper terminal to set the IP address and then try upgrading firmware via configure tool.
Or find another controller with IP address known, plug display unit and update firmware via configure tool and see if that helps...
May be good to get atleast Eth1 IP address set by detault to 172.16.1.1 may be....in the fresh units out from factory...