800xA postinstallation error adding connectivity servers
I am facing an error when i try to add connectivity servers in the postinstallation stage of a new 800xA system.
System version: 5.1 Rev D
1 (Redundant) Aspect Server/ Domain Controller
1 (Redundant) Connectivity Server AC800M/ FF OPC Server
1 (Redundant) Connectivity Server AC800M
Operating System of the servers: Windows Server 2008 Standard R2 SP1 64-bit
When I try to add a connectivity server the following message is shown on the configuration Wizard:
"The remote node can't reach server PriDCAS by the address PriDCAS: A security package specific error occurred"
Please could you help me?
Voted best answer
Thanks for the answers, I noticed that the problem was on the PriDCAS, it wasn't properly configured since the begining of the installation process, I reconfigured both DC and remove and rejoin the connectivity servers to the domain and then it worked fine.
1. Can you ping PriDCAS from Connectivity server with its name and IP address both.
2. Turn off firewall.
3. Check Time synchronization in both machines. Should not be off more than 5 minutes.
4. Turn off Virus Scan if any.
5. whats the error code you get. Can you attach a screen capture of your error.