Problem with installation of RTA PU515A on 800xA Version 4.1
I'm installing a single node with AC400 connect . When trying to add the RTA board from configuration wizard it gives me RTA server connection timeout . Also from application builder it see it's own settings only . Not connect to existing controllers . I tried to reconfigure driver, change PCI slot, remove and add again in control structure, but all these actions doesn't help. I rested the RTA board outside this configuration it works ok . My questions as follows:
1- can I use the external type with version 4.1
2- is that any hardware conflict with Dell precision T3500 machine.
3- how can I solve or diagnosis this issue??
Voted best answer
I assume you successfully loaded device driver (PU515 listed as "Multiport Serial Adapter" in device manager after driver and card installation?
PU515(A) draw FULL amps according to PCI spec - I know servers that fail starting a PU515 with regular 900 watt PSU but became able to start PU515 after replacing with 1200 watt PSU.
If the PU515 run well in other HW your T3500 seem to be unable to host a RTA...
PU410 (external RTA box) is available from 5.0 SP2.