Iis it possible programming AC 410 advant controller with STL language ?
We need to edit program of ABB advent controller. But we want to programming in structured test list and add "matrix", "for" , "while" and so on like C language.
is it possible ? and can we program AC410 in another language except AMPL and PC & DB element?
The only programming language suppoerted by the AC410 and AC450 controllers is AMPL.
There's a Free Programmable module (PU535 http://www.abb.com/SmartLinks/Default...) programmed using C, and the Pulp & Paper QCS uses a special application PROM on a slave CPU (again prgrammed using C) so it's certainly "possible", but whether its practicable or even cost effective is another matter.
I've never used the PU535 and have no manual for it. Its described as a free programable interface, so may not be suitable for what you want to do.
ABB likely would not release the toolset required to write a special PROM for AC450.
Another option might be to use an AC800M and connect it to the AC450 using a Masterbus interface. Or a cheap AC500 via modbus.