Still no luck with changing the IP of AC700
I attached a copy of of what I am seeing in Tera Termin attached file.
If you have any ideas I would appreciate it!
there obviously is a history in this issue (hence the word "Still") which I'm not aware of.
For a start have a look at the Mounting and Installation Manual for AC 7000F,
Chapter: "4.2.4 First Commissioning"
Maybe you can also shortly describe Which IP you want to set and what problem you have.
From trace it's clear that terminal window is connected with controller, controller performs self test and those line appears "To change these parameters, hit <SPACE> within 2 seconds".
Now when you hit space nothing happes there may be some possibilities.
1. key board conected properly ? means it's accepting command from any other key ?
to test that once you get "creating main task is done" hit enter or remove cable from PC connect again and hit enter by pressing enter, if key board is sending command then you get something displayed on teraterm window. If you don't get any text check key board connection or
check Numlock is lock or unlock, toggle that keys sometime hitting space not having any effect because of numlock enable or disable can't remember.
Not sure what else could be a problem !!
Last but not least hope you are hitting Space within 2 second :)
just don't hit once keep on hitting space key, before you get that line..
Hope this helps,