Contro builder library
Because my controller library are protected by password I cant copy or do some modifications. I try service and installer password, but they didn’t match. Is it any standard password.
Voted best answer
Unfortunately the passwords for all the standard libraries from ABB are not available. Even if you do somehow manage to "discover" them, they get changed each release.
The only option you have is to make a "Wrapper" around the Function Block you want to modify and change the inputs and outputs from the function as required. You can usually do about 90% of what you need this way.
The library is being protected by the Library owner. As of my undrstanding, these are ABB or product owner's intellectual property which they hesitate to share it with users. If they are protected, they are meant to be protected. And this password is not the same windows or 800xA user login password.
Do remember, if you dont have correct password then you will get the library locked after three failed attempts. In that case you have to try re-install of the library or contact ABB 80xA service desk.
By default all system lib are locked to be protected to ensure proper upgrade support, rather you can override the faceplate and edit but the drawback is keeping the old and override faceplate some times gives problem during upgrade phase
So you can create your own lib and use it and ensure don't give any password protection because if you lost that password you can't dig it then developer support us required to scratch the password