IP Configurator port already open issue!!!
I am using 800xA system, when i open IP config. utility, a pop up appears saying that
"Communication ports are already opened by IP configurator or other applications."
Please guide how to affix this problem?
Kindly check the Serial Port which you have selected in "IP Config" tool is already used or not by anyother tool in "Device Manager". If the same is already used/fixed for other softwares like bluetooth or PPP configuration, kindly move the port number.
Try to use different serial ports for IP Config. Thanks
I have faced the same problem. In the IPConfig Tool installed along with control builder. IPCONFIG tool is programmed to use communicaiton ports from Com1 to Com8.
And some laptops / Computer dont have the option of Serial port. So generally we use USB to Serial Converter.
While connecting the Converter adapter, we need to check in the device manager that the device connected is within Com1 to Com8, if not we need to change the port setting of the adapter, By going into the properties of that adapter in Device manager and in port tab, And in advanced Setting change the port to any ports between Com1 to Com8.
You may get this error sometimes if you dont connect the adapter as well.
Aminthab Pravin Yobu