process for down load programm in PM554
i want to dounload my backup file in new ABB PM554 plc ...
So please know me the all procedure
According to your question your CPU does not have any ethernet interface. If i am right, you have yo use serial TK503 cable for downloading program to CPU.
First step, you must install driver for TK503.
It will then configure one of your USB port as COM port. Go in your Device Manager, and then you check its Working status in its GENERAL tab
Second step,you have create or connect an already existing Communication link in your Codesys/Automation Builder. You will get it in COMMUNICATION VARIABLES, and then Local_conn , you can create or use other.
Third step: you must feed below mentioned SAME parameters in both Step 1 & 2.
BaudRate : 19200
Data Bits: 8
Parity : None
Stop bits : 1
Flow Control : None
For your second query, first confirmation will be your Device Manager port status: (working properly) . Second confirmation: After your successful Compliling of a Test/Main program you select ONLINE>LOGIN ,and either it will take you directly ONLINE or will ask you , if you want to DOWNLOAD PROGRAM FIRST TIME.
Also please visit below link for more detailed information:
Hope it helps you.