AC900 start up
Hello Freelance-friends I have a problem,
I ´m not able to adjust the clock in my 900 CPU.
When the text "Enter spacebar within 2 seconds" comes up
and I hit the space nothing happens. The start up procedure continues
and is not halted.
I have not installed any battery yet, is that the problem?
(Yes I have the correct cable and I have 19200 baud, everything is
corrcet and I have tried many times.)
controller needs to be in Stop mode ? not sure... didn't tried connecting with AC 900F via diag port yet.
Alternatively you can set clock or systemtime via CBF in comissioning mode, select controller/resource.... goto menu item, Options > set system time.
Timesync needs to be enabled before performing this...
With best regards
the "Handshake" configuration of the terminal program prevents the PC from sending data. So best set it to "no handshake"
Also some terminal programs take quite some time to send the first characters, so the 2 seconds might be too short for them. Try hitting the space bar several times before the message to hit it appears.