Tab Workplace - Feature Pack
we have upgraded to 800xA5.1 FP4, the tab operator workplace is not working if configured according to the operator workplace configuration manual.
The "Tab Grouping" aspect on the tab workplace shows "unable to locate base pane".
Any valuable suggestion would be appreciated.
Voted best answer
There are some panel configuration changes done as a part of FP3. The pane name should be changed to from name="idBase1 to name="Base1". The tabbed workplace works only when the base name starts with "Base". Also if the navigation root is changed in the TabGrouping aspect, the same should be changed in src attribute or the src can be like src="" so now changing the navigation root alone is required.