800xA 6.0.1 Device type Management issue
Hi, I am upgrading (Commissioning Stage) 800xA 3.1 SP2 to 800xA 6.0.1 64 bit system. Here i am having 05 PM864 controllers with Profibus PA devices approximately 130 transmitters. In ControlBuilder i am getting the values from PA devices. But I cannot open the transmitter configuration page in controll structure.
I enabled communication in CI854.
For some of the pressure and temperature transmitters, i upload the device done. then also i could not success to open the txr configuraiton page (device management).. Can any one help me in this?
Used Transmitter Types:-
1. ABB_TFx12 Ident# 1220
2. ABB_264 Ident# 1323
3. ABB_263_265 Ident# 1218
4. 2600T-266 PDP Ident# 13392
5. TTX300 Series. Ident# 13424
Suggested to get connect with device integration team in India, at email@example.com.
You need to provide following details while writing mail @ above email
Device name and Vendor details :
Fieldbus Protocol :
Device Type (HEX), Device Revision (for FF & HART) :
PNO ID of device (for profibus Device) :
ABB System and It's version :
Project name, location :
ABB Automation Sentinel Subscription ID:
Expected Date of Delivery of Integrated Device Type :
Hope that helps...