OPC Browser Error only for AC800M Control Network Tree (800xA 5.1)
Customers Sentinel has Expired so maybe You could help me and 'Him'
System is 800xA 5.1, working fine with AC800M controllers and AC450 Controllers, only problem that we've noticed some months ago is with the OPC Browser, when i connect to surrogate.1 opc server i can browse everywhere but cannot browse AC800M control network. i will attach example using 'AdvDSOPCClient' the same problem is using Matrikon or what ever. one example is that there is no problem browsing 'network11' tree and example of problem when trying to browse ac800 control network.
1. You have to notice that IF i'm gonna put OPC item path manually i can read/write those AC800m Control network items without anyproblem...
2. i've Restored that system on Virtual Machine and i have The Same Problem!!
Thanks in Advance for any Suggestions,
Voted best answer
It is the known issue in SV 5.1 and SV 5.1 Rev A
This could be due to insufficinet configuration of Alarm and Event list aspect under the Control network whcih you are browsing.Please recheck the AE list configuration again.
Product Bulletin is released for this issue - Please refer 3BSE066045_-_en_System_800xA_Operations_SV5.1_Browsing_for_properties_may_fail_
Attching the product bulletin for this issue.It can also be accessed from