ABB Panel 800 PP877 ethernet / network settings
Cannot find any info about where to set speed(10/100) and simplex/duplex. Is there a default setting for this, or it is automatic sensing the switch settings(Switch are to be manually configured).
Can find info that different protocols can be selected, but no info abut what these protocols contains....
The ABB CoDeSys TTH driver supports three different protocol types:
1. Tpc/Ip Level2 Route
2. ABB Tcp/Ip Level2 Route AC
The Ethernet speed is automatic sensing.
I don't understand what controller you wan't to talk with.
But if you have found the driver you wan't to use, then were you configure the TAGS there you can also select the tab Controllers och if you there press settings then you can some changes on the driver like a Modbus driver can be configured to be TCP or Serial.
Also in settings you find the button "Help" to get help about this driver like syntax of addresses.